The Selection And Application Of CNC Lathe Price
The selection and application of CNC Lathe price
The first is the effect of interpolation error on the accuracy of lathe. So try to adopt a certain way to reduce programming problems, using absolute programming, and can eliminate the error is to use insert will quality reference point for programming in the program.
Second, the approximation error affects the final precision. Because there is an approximation in the process so you have an error. Therefore, to master the profile equation as far as possible, the error can be reduced to a large extent when it is programmed, thus eliminating the influence of the precision of the CNC Lathe's price processing.
Third, due to the influence of roundness error in the programming process to lower the price of the CNC Lathe machining precision, so we should choose when processing the pulse equivalent to the linear displacement of the minimum value for reference. Therefore, it is important to work strictly according to the specifications on the drawing.
The CNC Lathe is based on the CNC programming technology, which makes the operation of the equipment more convenient. The price of CNC Lathes is used in environmental requirements, power requirements, temperature conditions and usage specifications.
The normal use of the price equipment of CNC Lathe must meet the following conditions. The voltage fluctuation of the power supply in the position of CNC Lathe is small, and the ambient temperature is lower than 30, and the relative temperature is less than 80%.
1. Environmental requirements
The price of CNC Lathe should be kept away from the vibration source, avoid the effect of direct sunlight and thermal radiation, avoid the effect of moisture and air flow. If there is a vibration source near the price of CNC Lathe, the CNC Lathe should be set up in four weeks. Otherwise, the machining accuracy and stability of the CNC Lathe will be directly affected, which will cause the electronic components to contact with the bad, and the failure will affect the reliability of the CNC Lathe price.
2. Power requirements
The price of CNC Lathe is installed in the machine workshop, not only the temperature of the environment changes, but the use condition is poor, and various kinds of electromechanical equipment, cause the power grid to fluctuate greatly. Accordingly, the position that installs the price of CNC Lathe, need power voltage has strict control. Voltage fluctuations must be within the allowable range and are relatively stable. Otherwise, it will affect the normal operation of the CNC system.
3. Temperature conditions
The temperature of the CNC Lathe is less than 30, and the relative temperature is less than 80%. Generally speaking, the CNC electric control box has a fan or cold fan inside to keep the electronic components, especially the central processor working temperature constant or temperature difference is very small. Excessive temperature and humidity will lead to lower life of control system components and more failures. The increase in temperature and humidity will result in a bond between the integrated circuit board and short-circuit.
4. Standardize the price of CNC Lathe
When using the price of CNC Lathes, users are not allowed to change the parameters set by the manufacturer in the control system. The setting of these parameters is directly related to the dynamic characteristics of the CNC Lathe price. Only the gap compensation parameter can be adjusted according to the actual situation.
The user can not change the price accessories of the CNC Lathe at will, such as using the hydraulic chuck that exceeds the specification. When setting up the attachment, the manufacturer fully considers the matching of all link parameters. Blind replacement causes a mismatch in the parameters of the various stages, causing even an estimated accident.
The pressure of hydraulic chuck, hydraulic tool holder, hydraulic tail seat and hydraulic cylinder should be in the range of allowable stress.