Horizontal Lathe Machine Inside The Knife Of The Common Features And Advantages
Horizontal Lathe machine inside the knife of the common features and advantages
There are many factors that affect the quality of parts, such as CNC machine tool precision, workpiece material, workpiece heat treatment, processing technology, coolant, tool and so on, in the process of applying Horizontal Lathe to manufacture product parts. Among them, the exact parameters of the tool set, has been very little attention and attention, today to introduce the Horizontal Lathe dedicated knife instrument common features.
1. Tool length / diameter of the automatic measurement and parameter update: the tool in the rotation of the length / diameter of the dynamic measurement, the measurement parameters include the lathe spindle runout / radial runout error, resulting in the tool at high speed processing "Dynamic" offset value; at the same time, you can at any time automatic measurement of the tool parameters, which greatly eliminates the machine tool thermal deformation caused by the tool parameters "change"; measurement results automatically updated to the corresponding tool parameter table, completely To avoid the potential risk of man-made tool and parameter input.
2. Automatic monitoring of tool wear / damage: In the actual production process, it is difficult for the operator to detect and correct (especially the smaller diameter drill) when the tool is worn or broken (broken), resulting in more The subsequent loss of the tool and even the scrap of the workpiece. The tool can be used to automatically measure the length of the tool before the tool is finished. If the normal wear and tear occurs, the wear value can be automatically updated to the tool loss parameter. If excessive wear occurs, (Broken) to choose to replace the new knife for the next workpiece processing or automatic shutdown alarm prompts the operator to replace the tool. This improves product quality and reduces tool wear or reject rates.
3. Horizontal Lathe automatic deformation of the deformation: the machine for production and processing, with the ambient temperature changes and changes in the workload, the machine's thermal deformation at any time in turn lead to changes in the tool, the result is the same workshop Taiwan Horizontal Lathe in the early / late / late at different times to produce the product size accuracy of a great fluctuation. After the machine tool is used, the tool parameters can be automatically measured and updated at any time during processing or during processing. Each measurement is a tool setting in the state where the machine is hot-deformed, which greatly reduces the Due to the introduction of thermal deformation of the machine.
4. Contour measurement and monitoring: In the special processing, such as forming knives, the use of machine outside the knife instrument for tooling contour measurement and tool status judgment is time-consuming and complex work, while the operator's tooling skills are also very High demand.