CNC Lathe Manufacturers In The Installation Of Various Parts Of The Machine Parts
Reasonable choice of CNC Lathe processing volume, and machine tools, tools, workpieces and technology and other factors have a great relationship, CNC Lathe manufacturers to tell you how to choose a reasonable amount of processing.
If the rough processing, you need to ensure a higher production efficiency, CNC Lathe manufacturers recommend the choice of a larger amount of kneading knife a, to ensure a larger feed, cutting speed U can choose low speed. And finishing, you need to ensure the size of the parts and surface accuracy, manufacturers recommend the choice of a small amount of back to eat knife ap, to ensure a smaller feed, cutting speed U can choose a higher speed.
In addition, the CNC Lathe roughing, the general should give full play to the potential of the machine and the cutting tool cutting capacity. If it is semi-finishing and finishing, should focus on how to ensure the quality of processing and improve production efficiency. When selecting the amount of cutting, make sure that the tool can complete a part or ensure that the durability of the tool is not less than one working class, at least half of the time of the work class.
CNC Lathe is used for the workpiece processing equipment, which is different from the traditional machine tool equipment, its own has many characteristics, CNC Lathe manufacturers for your fine to.
CNC Lathe machining accuracy than the traditional machine tools in the workpiece processing quality is also more stable, which is one of the reasons people choose it. With the progress of technology, CNC Lathe manufacturers of equipment can be multi-coordinate linkage, for some complex parts can also be processed, which is the traditional machine can not be achieved. If you encounter changes in the processing of parts, only need to change the NC program can save a lot of processing time and improve the processing efficiency.
CNC Lathe itself, high precision, high rigidity, you can choose a favorable amount of processing, higher productivity, is about 3-5 times the normal machine, its efficiency can not be underestimated. Technological progress is brought about by the increase in the degree of automation, the labor intensity of workers to be reduced, the number of operators on each device is also reduced, to some extent also save the human resources. Finally, with the improvement of equipment performance, the quality of the operator is relatively to improve the maintenance staff of the technology as well.
CNC Lathe is the processing equipment commonly used equipment, standard use of machine tools for the processing of the workpiece quality and lathe life has a great impact, CNC Lathe manufacturers to explain the norms of the use of lathe precautions.
CNC Lathe manufacturers in the factory machine, the control system will set the parameters within the control system, these parameters set with the dynamic characteristics of the various parts of the machine has a direct relationship, so users can not use these changes in the content, to prevent the use of machine tools In the event of a failure. Only in the gap compensation parameter values can be adjusted according to the actual situation. Hydraulic press in the machine, hydraulic tool holder, hydraulic cylinder and hydraulic tailstock pressure, should be within the allowable stress range, can not be arbitrarily increased.
CNC Lathe manufacturers in the installation of various parts of the machine parts, has been fully considered the parameters of the matching, so users can not arbitrarily replace the machine accessories, such as the use of instructions beyond the provisions of the hydraulic chuck. If the user blindly replace the attachment, resulting in the machine parts of the parameters do not match, it is likely to cause an unexpected accident, affecting production.