HORIZONTAL GAP BED LATHE
Features
Rapid design in apron, single handle operation.
Spindle forward, reverse running and break all use hydraulic control.
Manual break, foot break as optional.
Stable precision, strong cutting.
Use TSF anti-friction layer, flexible movement and long life.
Tailstock with dial line, easy use.
Cooling uses water-electricity separate, safe and good-looking.
Proper to machining iron casting, steel and various nonferrous metal.
Larger spindle bore and pipe threading machine available.
Specification
Item | Unit | CW6280B(C) | CW62110B(C) |
Max.swing diameter over bed | mm | 800 | 1100 |
Max.swing diameter over carriage | mm | 480 | 800 |
Max.workpiece length | mm | 1500 3000 4000-8000 | 1500 3000 4000-8000 |
Max.swing diameter and width in gap | mm | 1000/310 | 1300/310 |
Spindle bore | mm | 104（B）130 (C) | 104（B）130 (C) |
Taper in spindle nose | 120（B series）140 (C series)MT6 | 120（B series）140 (C series)MT6 | |
Steps and range of spindle speeds | r/min | 18speeds 5.4-720 | 18speeds 4.8-640 |
Steps and range of longitudinal feeds | mm/r | 64 feeds 0.06-24.3 | 64 feeds 0.05-24.3 |
Rapid speed of carriage | mm/min | 4000 | 4000 |
Pitch of leadscrew | 12(Metric); | 12(Metric); | |
Number,range of metric thread | mm | 50 kinds 1-240 | 50 kinds 1-240 |
Number,range of whitworth thread | t.p.i | 26 kinds 14-1 | 26 kinds 14-1 |
Number,range of module thread | mm | 53kinds 0.5-120 | 53kinds 0.5-120 |
Number,range of diametral thread | D P | 24kinds 28-1 | 24kinds 28-1 |
Max.cross travel of lower slide | mm | 500 | 500 |
Max travel of top slide | mm | 200 | 200 |
Max travel of tailstock quill | mm | 250 | 250 |
Taper of tailstock quill | MT6 | MT6 | |
Width of bed guideway | mm | 600 | 600 |
Main motor power | kw | 11 or 15 | 11 or 15 |