CNC LATHE CK3650
The feature :
● CK3650 CNC lathe is a good economic, environmental protection, high efficiency, suitable for general industrial development needs of cost-effective CNC lathe products.
● The lathe is CK3650 platform structure, equipped with GSK988TA system, equipped with spindle unit, main servo motor, eight-station servo tool rest, two-axis servo motor and linear guideway.
● The whole machine adopts fully enclosed protective structure, with high rigidity and good dynamic performance, reliable structure and easy operation.
● The lathe is suitable for processing all kinds of disc and short shaft parts, the typical characteristics of turning are as follows: end face and end face, external and internal hole thread, groove and rotary surface and other geometric characteristics.
● The lathe size can produce parts with accuracy up to IT6 and surface roughness up to Ra0.4 under optimal cutting conditions.
● The lathe is suitable for automobile, motorcycle, bearing, electronics, aerospace, military, non-ferrous metal processing and other industries to carry out high-efficiency, high-volume, high-precision processing requirements of rotary parts.
The feature :
1. Unit spindle (imported bearing),high rigidity, high torque, maximum torque
up to 215Nm with high accuracy for installation and maintenance.
2. Imported IEEPO servo turret, Simple construction, strong rigidity, fast
rotation, the transposition time of adjacent stations is 1.4s.
3. Domestic or Japanese BUERYUE Hydraulic station, compact structure, dimensionEasy to repair, high stability, so the barrier rate is extremely low.
4. High quality cast iron bed, reinforced sheet clothReasonable placement, with good stiffness.There is a big row under the bedChip hole, chip row effect is good.
5. Linear ball screw guideway with high stiffness, good dynamic performance and precision.Two axis rapid movement speed can be up to 30m/min, effectiveImprove the workpiece processing efficiency.
6. Integral tailstock drive the top tight, strong rigidity, simple structure, High reliability
Max. Turning diameter
Max. Turning length
Max.swing over bed
Max.swing over slide
Spindle nose form and code
Fore bearing inner diameter
Taper of spindle
Spindle bore diameter
Max. Diameter of bar
Standard chuck diameter
Max. Ratio of spindle
Spindle fixed torque
Max. Torque of spindle
Main motor output power continuous 30 minute
X / Y axis rapid movement speed
X axis stock
Z axis stock
Horizontal 8-position turret
Turret center height
Repeatability of turret transposition
Turret disc can be selected nearby turret or not
Nose tool holder
Boring tool holder
Φ32 x2/Φ40 x1
Distance from spindle center height to bed underside
Machine net weight
Total power supply capacity
Machine total current
Machine overall( LxWxH)
Machining roundness of workpiece
Machining cylindricity of workpiece
Machining flatness of workpiece
Machining surface roughness
Main motor and spindle power torque chart
80 center height 8-position turret interference pattern
Machine overall and floor space (side chip conveyor)
Machine overall and floor space (back chip conveyor)